RETZ瑞茨品牌 進口重載型撥叉式氣動執行器

品牌：retz瑞茨/我們一直致力于流體控制和測控領域的持續創新，始于2005……進口重載型撥叉式氣動執行器是一種程活塞式執行機構，適用90°轉角的閥門(如球閥、蝶閥、旋塞閥)的開關切斷或計量控制。撥叉式氣動執行器，通常指的是結構為"單氣缸雙活塞-變扭矩撥叉式"氣動執行器 retz the heavy-duty fork type pneumatic actuator is a piston type actuator suitable for on-off or metering control of valves with a 90 ° angle, such as ball valves, butterfly valves, and plug valves. fork type pneumatic actuator, usually referring to a pneumatic actuator with a structure of "single cylinder double piston variable torque fork type"
進口重載型撥叉式氣動執行器性能特點 performance features
1.ctr系列執行器在單作用可以提供120000n.m，雙作用可以提供240000n.m的扭矩輸出。工作壓力8bar。ctr spring return actuator can provide 120000n.m torque output,dng double acting actuator can provide 240000 n.m torque output .the maximum working pressure is 8 bar.
2.兩個獨立的行程調節螺栓，可以在±6℃的范圍調節閥門開關位置。two independent travel adjustment bolts,can be in the range of ±6℃ to regulate valve switch position.
3.工作溫度∶低溫型-40℃~80℃ 標準型-20℃c~80℃高溫型-20℃～150℃ working temperature: standard(-20℃~80°c)low temperature(down to-40℃℃)high temperature(up to150°c)
4.符合ip65以上的防護等級 comply with ip65 protection class.
模塊化設計 modulardesign
重載型撥叉式氣動執行器能夠針對不同的實用需求，選擇組合動力。極大的提升了模塊化的靈活性。減少維修與備貨成本。
provides maximized operational flexibility in selection and combination of power cylinder, body and spring pack depending on project requirement.addi-tional benefit would be less cost for maintenance and stocking of parts.
進口重載型撥叉式氣動執行器 內部結構 structure introduction
01.整件拋丸、三底三面噴漆處理，大幅提升表漆面牢固度和整體防腐蝕性能 whole shot blast, three bottom three sides with paint treatment, which dramatically improves firmness of the painted surface and overall corrosion resistant performance.
02.新型雙桿導向結構，力矩分配更加合理 unique new dual rod guide structure, torque distribution is more reasonable
03.軌道采用高頻淬火研磨處理，可拆卸設計，維護成本低 orbit is treated by high frequency quenching and grinding, with knock-down design, low maintenance cost.
04.namur標準尺寸，適用指示開關、定位器等配件安裝 the top-works dimensions, both for shaft height and mounting pattern are according to namur standards allowing for easy and standard limit switch、positioner attachment.
05.氣缸內壁鍍硬鉻，以限度地提高耐磨性和耐腐蝕性 the internal wallof the cylinder is hard chrome plated in order to maximize wear and corrosion resistance.
06.寬大方形活靈，大幅提高撥叉組件整體使用壽命 the slide block has a wide surface contact area, thereby increased service life of pneumatic actuator.
07.雙行程調節螺栓，可調節范圍在 ±6°以內 the pneumatic actuators are all provided with bi directional travel stops to allow for open and closed position location adjustments of+/-6 degrees.
08.高強度銅合金+石墨自潤滑功能滑塊，方形防卡死設計卡簧固定方式，保障零部件整體性、安全性和使用壽命high strength copper alloy, sliding block with graphite self lubricating function, square anti jamming design. spring fixed way, to protect the integrity, safety and service life of components.
09.特殊加大的閥軸孔徑設計，可直接安裝較大規格的直徑軸，無需另配聯軸器和支架 special increased valve shaft bore diameter design, can install thicker diameter shaft directly without coupler and bracket.
進口重載型撥叉式氣動執行器結構特點 structural features
1.重載型撥叉式氣動執行器通用于一般以90度旋轉的閥門。例如∶球閥、蝶閥、旋塞閥等開關或調節流量的功能 series heavy duty pneumatic actuators are designed to perform in the most demanding applications. they are engin-eered to automate all types of quarter turn valves(ball, butte-rfly,plug and damper) with multiple torque profiles available for every situation.
2.ctra系列執行器是對稱設計。在0度與90度時輸出扭矩。中間位置輸出扭矩最小。正對應于球閥類產生的扭矩特性 ctra series is equipped with a symmetric design yoke that produces maximum torques at both ends of the stroke (0°and 90°) and minimal in the middle,therefore this series is the optimal solution for metal seated ball valves,plug valves and for modulating service.
3.模塊化設計和結構可在安裝、維修和儲存方面提供便利 modular design and construction resulting in flexbility and interchangeability.
4.缸體內壁采用鍍硬鉻工藝，保證更長的使用壽命 using technology of plating hard chorming, which can ensure longer service life.
5.ctrb系列執行器是采用傾斜設計，可以輸出更大的起始扭矩，更符合蝶閥類的扭矩特性 ctrb series is equipped with a canted design yoke that produces a higher maximum torque at the beginning of stroke (i.e.valve unseating/reseating at 0°) and less torque at the end of stroke (90°), therefore this series is optimal solution forhigh performance butterfly valves.
6.軌道高頻淬火研磨處理，滑塊采用方形自潤滑工藝，能保證長久的使用壽命 pathway high-frequency quenching grinding treatment ,sliding block using self-lubricating technology, which can ensure permanent usability.